Manual Energy Storage Inverter ESI-S
The ESI-Manager user interface 117
−
To enable/disable the ‘auto restart’ function, go to
[/Welcome/Settings/Installation set./Start-Stop set./]
and enable” the auto start option.
−
To program the delay after which the inverter has restart once the power returns,
in the same menu specify the desired delay. This delay in available from the “drop
–down” menu, in “seconds”.
Remark: By default the ‘auto restart’ function is enabled and the delay time is set at 15s.
7.9.4.3 Setting up the system clock
For setting up the system clock, go to [/Welcome/Settings/Installation set./Clock]
In multi-master units these functions need to be set up in each master-unit in order to
obtain full redundancy.
The ESI is equipped with a system clock, which can be modified by the user. The date
and the time (Hr, Min. Sec) can be changed. The hour is presented in 24-hour format and
is set up for the time zone GMT +1.
7.9.4.4 Setting Password
For setting up the password, go to [/Welcome/Settings/Installation set./Password]
A password setting allows the user to set a software lock of the settings. Once set and
the installation are locked, the crucial parameters cannot be changed unless the
software lock is removed.
