Configuration
Power Panel FT50 User's manual V1.19
75
7.1.1.10.1.2 Configuring an update server of type
FTP
If option
Get update server from DHCP server
is disabled and update server type
FTP
is selected, the following
additional input fields are displayed:
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
About & Info
Load boot logo / animation
Press to load boot logo / animation from a USB flash drive
Update server type
Specify the update server type
FTP
Get update server from DHCP server
FTP user
pptclient
FTP password
Max. 100 characters
●●●●●●●●
Show password
Encrypt password
Save FTP password in encrypted form
Hostname / IP address
FTP user
Default setting: EMPTY (no username entered)
To access an update server of type
FTP
, an FTP username must be entered here.
FTP password
Default setting: EMPTY (no password entered)
Input range: Max. 100 characters
To access an update server of type
FTP
, an FTP password must be entered here.
The FTP password is stored on the device in configuration file PFT50Config.xml .
Show password
Default setting: Disabled
Enabled
The password is displayed in the input field as plain text.
Disabled
The password is hidden in the input field by placeholder characters (●●●●●●).
Encrypt password
Default setting: Disabled
Enabled
The password is stored on the device in encrypted form.
Disabled
The password is stored on the device as plain text.
Hostname / IP address
Default setting: EMPTY (no update server entered)
To update a Power Panel from an FTP server, a hostname or IP address for the FTP server must be specified.
The FTP connection is generally established via standard port 21 on the FTP server.
It is not possible to enter other ports!
Information:
If the entered IP address is incomplete or no FTP server exists for the IP address or entered hostname,
a message will be output that no network connection could be established if a connection attempt fails
during the update process.
