ABB ACS260-04 Series, Руководство пользователя

Страница: 64 / 98

64 Parameters
0160 DIGITAL INPUT
STATUS Binary value.
Displays the status of the drive inputs, starting with the left hand side
digit = Digital Input 1 etc.
0183 DC BUS VOLTAGE
RIPPLE LEVEL Displays the level of ripple present on the DC Bus Voltage in V DC.
This parameter is used by the drive for various internal protection and
monitoring functions.
0188 OPERATING TIME
ACCUMULATED
WITH HEATSINK
TEMPERATURE
ABOVE 85°C Displays the amount of time in hours and minutes that the drive has
operated for during its lifetime with a heatsink temperature in excess
of 85°C. This parameter is used by the drive for various internal
protection and monitoring functions. (HH:MM:SS)
0189 OPERATING TIME
ACCUMULATED
WITH AMBIENT
TEMPERATURE
ABOVE 80°C Displays the amount of time in hours and minutes that the DRIVE has
operated for during its lifetime with an ambient temperature in excess
of 80°C. This parameter is used by the DRIVE for various internal
protection and monitoring functions. (HH:MM:SS)
0190 DRIVE INTERNAL
COOLING FAN
TOTAL OPERATING
TIME Displays the total operating time of the drive internal cooling fans. The
first value shown is the number of hours. Pressing the Up key will
display the minutes and seconds. This is used for scheduled
maintenance information (HH:MM:SS)
0192 DC BUS VOLTAGE
RIPPLE LOG (22ms)
(V DC) 8 most recent values prior to trip, updated every 22ms.
0193 HEATSINK
TEMPERATURE LOG
(30s) (°C) 8 most recent values prior to trip, updated every 30s.
0194 AMBIENT
TEMPERATURE LOG
(30s) (°C) 8 most recent values prior to trip, updated every 30s.
04 FAULT HISTORY Fault history (read-only)
0402 RUN TIME SINCE
LAST TRIP (1) Run-time clock stopped by drive disable (or trip), reset on next enable
only if a trip occurred. Reset also on next enable after a drive power
down. (0 to 99 999 hours)
0406 DC BUS VOLTAGE
LOG 8 most recent values prior to trip, updated every 250ms. (0 … 1000V)
0415 RUN TIME SINCE
LAST TRIP (2) Run-time clock stopped by drive disable (or trip), reset on next enable
only if a trip occurred (under-volts not considered a trip) – not reset
by power down / power up cycling unless a trip occurred prior to
power down.( 0 to 99 999 hours)
0416 RUN TIME SINCE
LAST DISABLE Run-time clock stopped on drive disable, value reset on next enable.
(0 to 99 999 hours)
0417 DRIVE EFFECTIVE
SWITCHING
FREQUENCY Actual drive effective output switching frequency. This value maybe
lower than the selected frequency in parameter
2606 EFFECTIVE
SWITCHING FREQUENCY if the drive is too hot. The drive will
automatically reduce the switching frequency to prevent an over
temperature trip and maintain operation. (4 to 32 kHz)
33 INFORMATION Firmware package version, serial number etc..
ACS260-04.book Page 64 Thursday, December 24, 2020 4:33 PM