ABB ABILITY SSC600 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 70

background image

3.4

Setting IED and communication

3.4.1

Setting the communication between IEDs and PCM600

The communication between the IED and PCM600 is independent of the used

communication protocol within the substation or to the NCC. It can be seen as a

second channel for communication.
The media is always Ethernet and communication is based on TCP/IP.
Each IED has multiple Ethernet connectors, and all Ethernet interfaces can be used

to connect PCM600.
When an Ethernet based station protocol is used, the PCM600 communication

can use the same Ethernet port and IP address. The IED is able to separate the

information belonging to the PCM600 dialog.
To configure the physical connection and the IP addresses:
1. Set up or get the IP addresses of the IEDs.
2. Set up the PC for a direct link or connect the PC or workstation to the network.
3. Configure the IP addresses in the PCM600 project for each IED.

The addresses are used for communication between IEDs and PCM600.

3.4.2

Communication settings

The local and remote ports use fixed IP addresses, 192.168.0.254 and 192.168.1.254

respectively, and they also provide DHCP servers to assign an IP address for the

connected computer. The main communication port Ethernet interface has a factory

default IP address 192.168.2.10 when the complete IED is delivered. The service

communication port Ethernet interface has a factory default IP address 192.168.4.10

when the complete IED is delivered.
Different communication ports are available via optional communication modules.

Ethernet RJ-45 and optical Ethernet LC are the two station communication port

Ethernet communication options. Station communication port Ethernet is intended

for station bus communication. Communication protocols used via Ethernet ports

are IEC 61850-8-1 and IEC 61850-9-2 LE.

Use the correct Ethernet connectors in the IED with redundant

communication protocols like PRP. IEDs with PRP support have two

Ethernet connectors and redundant Ethernet ports are marked as LAN

A and LAN B.
The redundant communication module has two operation modes:

“Normal” and “PRP”. The operation mode can be changed from

communication settings.

For more information, see the communication protocol manuals and the

technical manual.

1MRS758850 D

Commissioning

SSC600

Operation Manual

23

«
...
21
22
23
24
25
...
»

Содержание ABILITY SSC600







































































Отзывы:

Нет отзывов

Похожие инструкции для ABILITY SSC600

Бренд: Aalborg Страницы: 128

Бренд: 2N Страницы: 4

Бренд: rada Страницы: 16

Бренд: Easy-Laser Страницы: 84

Бренд: Easy Heat Страницы: 4

Бренд: Saab Страницы: 4

Бренд: Valcom Страницы: 6

Бренд: YASKAWA Страницы: 121

Бренд: YASKAWA Страницы: 17

Бренд: YASKAWA Страницы: 58

Бренд: YASKAWA Страницы: 30

Бренд: RADEMACHER Страницы: 68

Бренд: Reliance Foundry Страницы: 3

Бренд: Wesa Страницы: 8

SUPERSTAR E-3000/F2

Бренд: praher Страницы: 10

Бренд: IDEC Страницы: 97

Бренд: Sherlotronics Страницы: 2

Бренд: Grundfos Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды