ABB ABILITY SSC600 Скачать руководство пользователя страница 12

Страница: 12 / 70

The whole substation can be controlled and different tasks and functions can be

performed with the individual tool components. PCM600 can operate with many

different topologies, depending on the customer needs.

For more information, refer to PCM600 documentation.

1.2.1

Connectivity packages

A connectivity package is a software component that consists of executable code

and data which enables system tools to communicate with an IED. Connectivity

packages are used to create configuration structures in PCM600. The latest

PCM600 and connectivity packages are backward compatible with older IED

versions.
A connectivity package includes all of the data which is used to describe the IED.

For example, it contains a list of the existing parameters, data format used, units,

setting range, access rights and visibility of the parameter. In addition, it contains

code which allows software packages that consume the connectivity package to

properly communicate with the IED. It also allows for localization of text even when

its read from the IED in a standard format such as COMTRADE.
Update Manager is a tool that helps in defining the right connectivity package

versions for different system products and tools. Update Manager is included with

products that use connectivity packages.

1.2.2

PCM600 and IED connectivity package version

• Protection and Control IED Manager PCM600 2.9 or later
• SSC600 Connectivity Package Ver.1.0 or later

Download connectivity packages from the ABB Web site

www.abb.com/

mediumvoltage

or directly with the Update Manager in PCM600.

1.3

This manual

The operation manual contains instructions on how to operate the IED once it has

been commissioned. The manual provides instructions for monitoring, controlling

and setting the IED. The manual also describes how to identify disturbances and

how to view calculated and measured power grid data to determine the cause of a

fault.

1.3.1

Intended audience

This manual addresses the operator, who operates the IED on a daily basis.
The operator must be trained in and have a basic knowledge of how to operate

protection equipment. The manual contains terms and expressions commonly used

to describe this kind of equipment.

Introduction

1MRS758850 D

SSC600

Operation Manual

Содержание ABILITY SSC600






































































Результаты поиска

Содержание ABILITY SSC600

Отзывы:

Похожие инструкции для ABILITY SSC600

Бренды по названию

Популярные бренды

ABB ABILITY SSC600, Руководство по эксплуатации

Результаты поиска

Содержание ABILITY SSC600

Отзывы:

Похожие инструкции для ABILITY SSC600

Бренды по названию

Популярные бренды