ABB ABILITY SSC600 Скачать руководство пользователя страница 13

Страница: 13 / 70

1.3.1.1

Document conventions

A particular convention may not be used in this manual.

• Abbreviations and acronyms in this manual are spelled out in the glossary. The

glossary also contains definitions of important terms.

• whmi menu paths are presented in bold typeface.

Select Main menu > Settings.

• whmi menu names are presented in bold typeface.

Click Information in the whmi menu structure.

• Parameter names are shown in

italics.

The function can be enabled and disabled with the

Operation setting.

• Parameter values are indicated with quotation marks.

The corresponding parameter values are "On" and "Off".

• ied input/output messages and monitored data names are shown in Courier

font.
When the function starts, the

START

output is set to TRUE.

1.3.1.2

Symbols

The warning icon indicates the presence of a hazard which could result in

electrical shock or other personal injury.

The caution icon indicates important information or warning related to

the concept discussed in the text. It might indicate the presence of

a hazard which could result in corruption of software or damage to

equipment or property.
The information icon alerts the reader of important facts and conditions.

The tip icon indicates advice on, for example, how to design your project

or how to use a certain function.

Although the warning hazards are related to personal injury, it is necessary

to understand that under certain operational conditions, operation of damaged

equipment may result in degraded process performance leading to personal injury

or death. Therefore, comply fully with all warning and caution notices.

1.3.1.3

Functions, codes and symbols

All available functions included in the IED are listed in the tables below. Available

functions depend on the chosen product options.

1MRS758850 D

Introduction

SSC600

Operation Manual

Содержание ABILITY SSC600






































































Результаты поиска

Содержание ABILITY SSC600

Отзывы:

Похожие инструкции для ABILITY SSC600

Бренды по названию

Популярные бренды

ABB ABILITY SSC600, Руководство по эксплуатации

Результаты поиска

Содержание ABILITY SSC600

Отзывы:

Похожие инструкции для ABILITY SSC600

Бренды по названию

Популярные бренды