ABB ABILITY SSC600 Скачать руководство пользователя страница 21

Страница: 21 / 70

Commissioning

3.1

Commissioning checklist

Familiarize yourself with the IED and its functionality before you start the

commissioning work.
• Ensure that you have all the needed station drawings.
• Ensure that your version of the technical manual applies to the IED version you

test.

• Ensure that your setting software and connectivity packages work with the IED

version you test.

• Find out if you need any additional software.
• Ensure that you have the IED settings either on paper or in electronic format. The

settings and logic should be well documented.

• Inspect the settings to ensure that they are correct.
• Ensure that you have the correct cable to connect your PC to the IED's

communication port. The RJ-45 port supports any CAT 5Ethernet cable but the

recommendation is STP.

• Test your PC's communication port before you go to the site.
• Find out who to contact if you have trouble and make sure you have a means to

contact them.

• Find out who is responsible for the settings.
• Ensure that you have with you the proper test equipment and all needed

connection cables.

• Ensure that the owner of the switchgear familiarizes you with the work site and

any special aspects of it.

• Ensure that you know how to operate in emergency situations. Find out where

the first aid and safety materials and exit routes are.

3.2

Checking the installation

3.2.1

Checking of the power supply

Check that the auxiliary supply voltage remains within the permissible input voltage

range under all operating conditions. Check that the polarity is correct before

powering the IED.

1MRS758850 D

Commissioning

SSC600

Operation Manual

Содержание ABILITY SSC600






































































Результаты поиска

Содержание ABILITY SSC600

Отзывы:

Похожие инструкции для ABILITY SSC600

Бренды по названию

Популярные бренды

ABB ABILITY SSC600, Руководство по эксплуатации

Результаты поиска

Содержание ABILITY SSC600

Отзывы:

Похожие инструкции для ABILITY SSC600

Бренды по названию

Популярные бренды