ABB Ability MACHsense-R, Руководство пользователя

Страница: 44 / 74

4. Select the location identified as 3 or 4 on the NDE side (see in below figure)
for better signal quality from the sensor and for correct estimation of motor
speed.
Drive end (DE) 1
Non-drive end (NDE) 2
Mount the MFS
The MFS or magnetometer is covered with a plastic case. The MFS enclosure can
be mounted directly on to the motor using glue.
To mount the MFS, do the below steps:
1. Remove any paint on the surface by grinding, so the sensor can be glued directly
onto the metal of the motor.
2. Apply Loctite® 407™/AA326™ glue with the activator onto the motor surface.
See specifications of
Loctite
®
AA 326 (page 72)
44 Installing the Magnetic Field Sensor