ABB Ability MACHsense-R, Руководство пользователя

Страница: 39 / 74

1. Remove all paint from the surface and apply glue to the pad directly on the
metal of the motor.
2. Clean the surface with the recommended cleaner, Loctite 7061.
3. After the cleaner has dried, apply Loctite AA326 glue to the mounting pad. Put
the glue on the side where the threaded mounting hole is not positioned. For
specifications of glue,
Loctite
®
AA 326 (page 72) .
4. Spray Loctite SF 7649 activator onto the glue and the surface of the motor.
Attach the mounting pad in the correct position immediately and keep steady
for 10 minutes. For more information, see
Loctite
®
SF 7649 (page 72) .
Fix the triaxial mounting base
Fix the triaxial mounting base or cubical structures with threaded holes or studs
to mount the accelerometers.
Install mounting pads in motors with fins
Some motor types, for example, motors with cooling fins require different type
of mounting pads. For more information, contact your local ABB representative.
To install the mounting pads in motors with cooling fins, do the below steps:
1. Scrape or grind away any paint or debris between the cooling fins to prepare
the motor for mounting.
2. Apply glue to the sides and bottom of the probe portion of the mounting pad.
Installing the accelerometers 39