4
2 6 6 H S H MODBUS TR A N S M IT TE R |
P R E SSU R E/ T EM P ER AT U R E M U LT I VA R I A B L E | O I/ 2 6 6 H SH M T- EN R E V. A
2.4 Warranty provision
Using the device in a manner that does not fall within the
scope of its intended use, disregarding this manual, using
underqualified personnel, or making unauthorized
alterations, releases the manufacturer from any liability for
any resulting damage. This makes the manufacturer’s
warranty null and void.
2.5 Use of instruction
Danger – <Serious damage to health/risk to life>
.
This
message indicates that an imminent risk is present. Failure to
avoid this will result in death or serious injury.
Caution – <Minor injuries>
.
This message indicates a
potentially dangerous situation. Failure to avoid this could
result in minor injuries. This may also be used for property
damage warnings.
Important.
This message indicates indicates operator tips or
particularly useful information. It does not indicate a
dangerous or damaging situation.
Warning – <Bodily injury>.
This message indicates a potentially
dangerous situation. Failure to avoid this could result in death
or serious injury.
Attention – <Property damage>.
This message indicates a
potentially damaging situation. Failure to avoid this could
result in damage to the product or its surrounding area.
2.6 Operator liability
Prior to using corrosive and abrasive materials for
measurement purposes, the operator must check the level
of resistance of all parts coming into contact with the
materials to be measured.
ABB will gladly support you in selecting the materials, but
cannot accept any liability in doing so.
The operators must strictly observe the applicable national
regulations with regard to installation, function tests,
repairs, and maintenance of electrical devices.
2.7 Qualified personnel
Installation, commissioning, and maintenance of the
device may only be performed by trained specialist
personnel who have been authorized by the plant operator.
The specialist personnel must have read and understood
the manual and comply with its instructions.
2.8 Returning devices
Use the original packaging or suitably secure shipping
package if you need to return the device for repair or
recalibration purposes. Fill out the return form (see the
end of the document) and include this with the device.
According to guidelines and other local laws for hazardous
materials, the owner of hazardous waste is responsible for
its disposal. The owner must observe the proper
regulations for shipping purposes.
All devices sent back to ABB must be free from any
hazardous materials (acids, alkalis, solvents, etc.).
2.9 Disposal
ABB actively promotes environmental awareness and has
an operational management system that meets the
requirements of ISO 9001:2015, ISO 14001:2015, and OHSAS
18001:2007. Our products and solutions are intended to
have minimum impact on the environment and persons
during manufacturing, storage, transport, use and
disposal.
This includes the environmentally friendly use of natural
resources. ABB conducts an open dialog with the public
through its publications.
This product/solution is manufactured from materials that
can be reused by specialist recycling companies.
2.10 Information on WEEE Directive 2012/19/EU
(Waste Electrical and Electronic Equipment)
This product or solution is subject to the WEEE Directive
2012/19/EU or corresponding national laws. Starting from
August 15th 2018, electrical and electronic equipment
marked with the crossed-out wheeled bin symbol may not
be disposed as unsorted municipal waste. Waste of
electrical and electronic equipment (WEEE) shall be treated
separately using the national collection framework
available to customers for the return, recycling and
treatment of WEEE.
Proper disposal prevents negative effects on people and
the environment, and supports the reuse of valuable raw
materials. ABB can accept and dispose of returns for a fee.
2.11 Transport and storage
— After unpacking the pressure transmitter, check the
device for transport damage.
— Check the packaging material for accessories.
— During intermediate storage or transport, store the
pressure transmitter in the original packaging only.
For information on permissible ambient conditions for
storage and transport, see paragraph “4.4 Storage” and
product datasheet. Although there is no limit on the
duration of storage, the warranty conditions stipulated on
the order acknowledgment from the supplier still apply.
2.12 Safety information for electrical installation
Electrical connections may only be established by
authorized specialist personnel in accordance with the
electrical circuit diagrams. The electrical connection
information in the manual must be observed; otherwise,
the applicable protection type may be affected. Ground
the measurement system according to requirements.
2.13 Safety information for inspection and
maintenance
Warning – Risk to persons.
There is no EMC protection or
protection against accidental contact when the housing cover
is open. There are electric circuits within the housing which are
dangerous if touched. Therefore, the auxiliary power must be
switched off before opening the housing cover.
Warning – Risk to persons.
The device can be operated at high
pressure and with aggressive media. Any process media
released may cause severe injuries. Depressurize the pipeline/
tank before opening the transmitter connection.
