ABB 2600T Pressure Transmitter Series Скачать руководство пользователя | Manualshive

Страница: 66 / 88

background image

364xS User’s Manual

66

Additional Safety

"Ex Safety" Aspects for North America

According to Factory Mutual Standards which can assure compliance with Essential Safety Requirements

FM 3600

: Electrical Equipment for use in Hazardous (Classified) Locations, General Requirements.

FM 3610

: Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, and

Class I, Zone 0 & 1 Hazardous (Classified) Locations.

FM 3611

: Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III Division 1

and 2 Hazardous (Classified) Locations.

FM 3615

: Explosionproof Electrical Equipment.

FM 3810

: Electrical and Electronic Test, Measuring and Process Control Equipment.

NEMA 250

: Enclosure for Electrical Equipment (1000 Volts Maximum)

The 364 pressure transmitter models have been certified by Factory Mutual for the following Class, Divisions
and Gas groups, hazardous classified locations, temperature class and types of protection.

Explosionproof for Class I, Division 1, Groups A, B, C and D, hazardous (classified) locations.

Dust Ignition proof for Class II, III Division 1, Groups E, F and G, hazardous (classified) locations.

Suitable for Class II, III, Division 2, Groups F and G, hazardous (classified) locations.

NonIncendive for Class I, Division 2, Groups A, B, C and D, in accordance with Nonincendive field
wiring requirements for hazardous (classified) locations.

Intrinsically Safe for use in Class I, II and III, Division 1, Groups A, B, C, D, E, F, and G in accordance
with Entity requirements for hazardous (classified) locations.

Temperature class T4 to T6 (dependent on the maximum input current and the maximum ambient
temperature).

Ambient Temperature range -50°C to +85°C (dependent on the maximum input current and the
maximum temperature

class).

Electrical Supply range Minimum 10.5 Volts, Maximum 42 Volts (dependent on the type of protection,
maximum ambient

Temperature, maximum temperature class and communication protocol).

Type 4X applications Indoors/Outdoors.

NOTE

The 364 pressure transmitter models installed in Explosionproof Class 1 Division 1 Group A, B, C

and D hazardous (classified) location does not require conduit sealing as per

FM 3615 sect 4.3 / NEC 501.15

.

For a correct installation in field of the 364 pressure transmitter models please see the related control
drawing.

Note that the associated apparatus must be FM approved.

«
...
64
65
66
67
68
...
»

Содержание 2600T Pressure Transmitter Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для 2600T Pressure Transmitter Series

Бренд: Rangevision Страницы: 31

Бренд: Taurus Страницы: 28

Бренд: Kärcher Страницы: 54

Бренд: ABB Страницы: 85

Бренд: Panasonic Страницы: 180

Бренд: Banfer Страницы: 6

FreeStyle Comfort

Бренд: CAIRE Страницы: 33

Бренд: Nellcor Страницы: 161

OXIMAX N-600X Series

Бренд: Nellcor Страницы: 210

Бренд: OAKWORKS Страницы: 24

Бренд: Zimmer Страницы: 54

Бренд: Zimmer Страницы: 4

Бренд: Zimmer Biomet Страницы: 23

Бренд: Zimmer Страницы: 16

Бренд: Zimmer Страницы: 2

Бренд: Zimmer Страницы: 32

Бренд: Zimmer Страницы: 96

Бренд: Park House Healthcare Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды