AAton CANTAR X3 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 85

AAton CANTAR X3 Скачать руководство пользователя страница 79

A percentage of completed idle process will be displayed in green above the media
icon, up to End when it's finished.
The process will be automatically interrupted when exiting from TEST position. The
unfinished copy is erased. If you modify the metadata of a take, it is modified on the idle
target media if it is still available.
Before removing target media, take time to run Snap report [F6] into BROWSING
position to create reports if needed.
If media is full, insert another media and Idle Backup will continue from where it
previously stopped.
This function is useful, when media is too slow to work in mirroring.

•

For external slate mic, bias power ON/OFF is now available (see bias power into
AUDIO PARAMETERS page).

•

Delay on inputs are displayed at the top of solo dialog box.

•

IN PLAY position F3 switch between timecode and elapse under the wave form.

•

By default, all new takes are not circled.

•

Phantom power on Mic inputs stay ON when switching between Mic level and high
level.

•

EQ gain (low, mid and High) are quickly adjusted (+1dB step) with (SHIT+Jog).

•

In Playback mode track names are displayed over the wavform during solo
You got the remaining time on each media according to the current configuration.

version 1.84 (November 03, 2015)

•

Free media size is displayed in stop position pressing the Up or down buttons.
Remaining time on each media is displayed according to the current record configuration.

•

Bug fix on
Stability improvements (all previous versions were affected).

version 1.83 (October 22, 2015)

•

Headphone stay active in all positions of the main selector (except in STOP and IN GRID
ROUTING)

•

In COPY/BACKUP, if target free size is lower than the size of selected Takes, user is still
allowed to start the backup.
(useful if you backup at midday and in the evening on the same card and if the total
backup size is close to the target media size)

•

Bug fix on
  Edit of last Take's metadata in the Audio Browser Menu automatically updates next
  Take's metadata.
  Jog conflict in Solo Line during EQ setup.
  Assignation dialog box (down key on Digital input).
  Improved improperly closed file algorithm.
  Various small bug fixes.

version 1.82 (October 14, 2015)

•

Circle takes management

◦

Circle status displayed in Audio & Backup Browsers Menu

◦

[Shift+F3] in Audio Browser Menu (directly or in Edit screen) toggles the circle status
(available in multi selection ; change is automatically reflected on all available media

•

Locked panel and disarmed Tracks settings are saved in case of a Cantar Power
OFF/ON.

•

Detection of SD card Lock switch.

•

Improperly closed audio files (power failure, media error, system error) may be fixed

Cantar X3

79

«
...
77
78
79
80
81
...
»

Содержание CANTAR X3






















































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды