AAton CANTAR X3, Руководство пользователя

Страница: 29 / 85

the case with polyphonic. It is wise to momentarily disarm a Track when there is no need for
it.
A disarmed Track has its Vumeter colored in grey and a red 'disarmed' icon displayed.
Pict. 39
NB:
It is also possible out of Solo window to toggle Track's Status, while the Main Selector is in
the Test or Pre-Record positions, by pressing Shift + Solo button of the Track.
ii. Mixdown PanPot
Toggle between Left, Right and Center with the F4,F5 and F6 buttons.
Access the Fine Pan through Shift + F5 button.
NB: For Mixdown Tracks, this item is inactive.
iii.
Track Name
Press the OK button to edit the Track Name. Once in edit mode, press the Escape button to
Cancel, or the OK button to validate.
iv.
Attenuation
If a Track is not assigned to an actuator (Mixer or Cantarem or Cantarem2 slider), its attenuation
can be changed during Solo by rotating the Jog wheel.
4.
AES
The solo of an AES input is obtained by pressing the Solo button of the actuator assigned to the
input. If the input has no actuator assigned, open the Solo panel of any input and then rotate the
Left Crown while holding the Shift button pressed until the AES-Solo panel appears.
Two versions of each digital input are available: the original input (symbolised by a lowercase
letter) and a version with digital gain (symbolised by an uppercase letter).
During the AES-Solo, the version with digital gain is sent to the headphones.
In the panel is displayed:
•
The Power status of all the digital inputs (AES and AES-42). This
parameter can be modified in the Audio/Timecode menu.
• The digital gain applied to the input.
•
The digital filter applied to the input (refer to the Mic Solo for
settings)
• The phase inversion applied to the input.
NB:
•
If the input is not assigned to any actuator, the gain is setup using the Jog wheel.
• The range of the digital gain is from - ¥ to +12dB.
Cantar X3
29