AAton CANTAR X3, Руководство пользователя

Страница: 19 / 85

NB: •
Quick way
:
Press the appropriate Solo-Track button to select the Track, then press the
appropriate Input-Solo button to toggle its state (hold the Shift button for MS Mic Input).
•
Mix Left can only be accessed through Row 1
•
Mix Right can only be accessed through Row 2
•
MS mics should be routed on adjacent Tracks: M side on an uneven Track number and
S side on the following Track.
• When routing or removing an MS mic, the other side (M or S) is automatically
routed/removed.
•
A digital gain can be applied on Digital inputs: from - ¥ to +12dB on AES inputs and
from - ¥ to +36 dB for AES 42.
Both version of inputs (before or after gain) can be routed in an InGrid. These versions are
symbolised by the letter representing the input type being capital or not: for example, for
an AES input, 'd' is for the digital input before gain and 'D' is for the digital input after
gain.
To toggle between the two versions: select the item and press the Right or Left button.
•
For input number superior to 8: Dante (optional), PostFade an arrow is displayed, select
the item and press Right/Left button to adjust the input number.
•
PostFade N is the output of the track N through the attenuation applied to this track. Be
careful, the PostFade has a delay of 1 sample.
•
Refer to Annex to see the Cantar Audio Chain .
ii.
Remove input
Use the direction buttons to move the yellow selection box and select the appropriate Track and
the input number.
• Press the OK button to display the Input choice panel and choose “Remove”.
Or
•
Double press the ESC button.
Or
•
Press the Solo button of the appropriate input.
NB: All inputs routed to a Track can be removed by holding the ESC button.
2.
Pan-Pot to Mixdown
Each Track can contribute to the Mixdown through the PanPot.
Pan-pot is represented on the last row and indicates each Track contribution to the Mixdown Left
and Right.
•
L means the Track is sent to Mix-Left.
•
R means the Track is sent to Mix-Right.
•
C means the Track is sent to both Mix-Left and Mix-Right.
•
X means the Track is not sent to the Mixdown.
Example: on Pict.12:
•
Track 3 is sent to Midown-Left.
•
Tracks 4 to 10 are sent to Mixdown-Right.
• other Tracks are not sent to Mixdown (Track 1 and 2 cannot for obvious
reason by sent to Mixdown).
The F4 button toggles the Left contribution.
The F6 button toggles the Right contribution.
The F5 button cycles through the L, R, C, X options.
Cantar X3
19