AAton CANTAR X3, Руководство пользователя

Страница: 45 / 85

STOP
Stop Menu is while the Main Selector is at the 9 o'clock position.
This position is a low-power position.
Pict. 78
I. Media Free Space
The remaining free space on each media is displayed. By pressing the Up or Down buttons, it is
possible to toggle between remaining space and remaining time which is calculated according
to the recording configuration used on each media (“N.A” is displayed if the media is not used,
and “--” if the media is not present).
II. Low Power Mode
While the Main Selector is in the Stop position, if the low power option was activated in the
Technical Menu, according to the time set up, the Cantar will go in low power mode.
5 seconds before engaging the low power mode, a message is displayed.
Pict. 79
In that mode, in order to save energy many things are powered-off:
•
Inputs and outputs: Mic, Lines, Dante, Aes, Aes42
• The screen
While being “asleep” the Cantar, in order to signal that it is still alive, have the F1 to F3 buttons
alternatively lit.
To get out of the low power mode, either press the Power or the F1 or the F2 or the F3 buttons
or simply change the Main Selector's position.
III. Power On/Off
1. Power ON
Press the Power ON/OFF button to power up your Cantar. A few LEDs should be illuminated
symbolising the startup sequence.
Cantar X3
45