AAton CANTAR X3 Скачать руководство пользователя страница 52

Страница: 52 / 85

AUDIO FILE BROWSER

Main Selector is in the 7 o'clock position.
This position enables to:

•

Browse Takes on all media.

•

View and/or modify Metadata.

•

Trash, untrash or delete Takes.

•

Fix improperly closed files.

Pict. 95

I. Browser

In the top part, Media, Project folder and Day folder can be modified. Select the desired field
with the Left and Right buttons and press the OK button.

: It is possible to refresh the Project list, by re-selecting the Media, as well as refreshing the

Day list by re-selecting the Project.

II. Editing Metadata

1. Single File edit

•

Select one file with the Up and Down buttons.

•

In the top part, select 'EDIT' field and press the OK or the F4 buttons to open the Edit panel.

Pict. 96

•

Select the appropriate field with the Left and Right buttons, and press the OK button to begin

edition. Once in edition:

Press the ESC button to leave Edit mode (and then once again to close the panel).

Press the F4 button to directly close the Edit panel.

Press the OK button to validate modification and to move focus to the next field.

Press the Right and Left buttons or the Jog wheel to change the current selected

character (moving before the first character or after the last, changes the active field to the
next or to the previous one).

•

Modifications are applied once the Edit panel is closed.

Cantar X3

Содержание CANTAR X3






















































































Результаты поиска

Содержание CANTAR X3

Отзывы:

Бренды по названию

Популярные бренды

AAton CANTAR X3, Руководство пользователя

Результаты поиска

Содержание CANTAR X3

Отзывы:

Бренды по названию

Популярные бренды