Aastra 9143i Series, Руководство администратора

Страница: 1023 / 1140

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-04 Rev 02, Release 2.5 A-237
Parameter –
topsoftkeyN value
Top Softkeys->Value
(In WEb UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the softkey.
The “ topsoftkeyN value ” parameter can be set for the following softkey
types only:
•
speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
• blf
• sprecode
• park
• pickup
• dcp
• xml
• blf/xfer
• speeddial/xfer
• speeddial/conf
• paging
Notes :
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2. For blf - Value is the extension you want to monitor.
3. For sprecode - Value is dependent on services offered by server.
4. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page -241 . For
Park/Pickup examples, see Chapter 5, the section, “Examples for
Models with 8 and 11-Line LCDs” on page -239.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$$