manualshive.com logo in svg

Aastra 6700i Series, Руководство администратора

Поделиться
Скачать
Aastra 6700i Series Скачать руководство пользователя страница 348

41-001343-01 Rev 02, Release 3.2.2 

5-71

Call Waiting

The call waiting feature notifies a user on an active call on the phone, of a new incoming call. You 
can disable this call waiting feature, so that the new incoming call is automatically rejected by the 
phone with a busy message. A User or Administrator can configure this feature.

If you disable call waiting on the phone, and the user is on a call, any further incoming calls will 
receive busy unless “Call Forward Busy” or “Call Forward No Answer and Busy” is configured on 
the phone. It will then forward the call according to the rule configured. The phone can only:

•

transfer the currently active call

or 

•

accept transferred calls if there is no active calls.

If call waiting is disabled:

•

on the 6757i CT bases, and the handset is currently on a call, all additional incoming calls are 
rejected on the handset.

•

intercom calls are treated as regular incoming calls and are rejected.

•

pre-dialing with live dial pad disabled still accepts incoming calls.

•

the “Incoming Call Cancels Dialing” parameter is ignored because the incoming call is 
automatically rejected.

•

the Missed Calls List does not get updated with details of calls.

•

the Blind Transfer feature on the phone may not work if two calls are made to the phone at one 
time.

You can enable/disable call waiting on a global or per-line basis using the configuration files or the 
Aastra Web UI.

Configuring Call Waiting

Use the following procedures to configure the Call Waiting feature on the IP phone.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, 

“Call Waiting 

Settings”

 on 

page A-76 

or

 “SIP Per-Line Call Waiting Setting” 

on 

page A-88

.

Содержание 6700i Series




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды