Aastra 6700i Series, Руководство администратора

Страница: 588 / 1043

41-001343-01 Rev 02, Release 3.2.2 5-311
Action URI Connected
A parameter called “
action uri connected
” (configuration files) and “
Connected
” (Aastra Web
UI) now allows XML scripts to determine when a call is connected. When enabled, the phone
triggers an HTTP GET when it goes into the “connected” state. This includes regular phone calls,
intercom calls, paging calls, RTP streaming, and the playing of a WAV file. It is also triggered
when the phone establishes the second leg of a 3-way call.
This parameter can use the following variables:
If the Administrator enables this feature (by specifying a connect URI), when a call is
connected, the phone
checks to see if the event has a Connect URI configured. If the phones
finds a configured URI it executes an XML script or the variable if defined.
Example
In the configuration files, you can enter the following:
action uri connected: http://www.example.com/connect.php
An Administrator can enable the “Connected” Action URI feature using the configuration files or
the Aastra Web UI.
Limitations
• During SLA calls, the phone uses the Action URI Connected parameter when the line is seized
before the caller dials out.
• SCA and BLA calls on hold trigger the Action URI Connected parameter, since the retrieval is
a 2nd call by the phone, and the phone cannot link the retrieved call with the earlier held call.
For more information about the XML API objects, see Aastra’s XML Developers Guide .
Configuring the Action URI Connected Feature
Use the following procedure to configure the Action URI Connected feature on the phone.
• $$REMOTENUMBER$$ • $$LINESTATE$$
• $$DISPLAYNAME$$ • $$CALLDIRECTION$$
• $$SIPUSERNAME$$ • $$LOCALIP$$
• $$SIPAUTHNAME$$ • $$DISPLAYNAME$$
• $$INCOMINGNAME$ • $$CALLDURATION$$
• $$PROXYURL$$ • $$REGISTRATIONSTATE$$
• $$REGISTRATIONCODE$$
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Action URI
Settings” on page A-144.