AAQ AutoLift AL-162016, Руководство по установке и инструкции по эксплуатации

Страница: 17 / 31

162016
emergency is also necessary, the room must be previously arranged for the power
supply and pneumatic feed of the car lift. The room must be 4000 mm in height, at
least, the car lift can be placed on any floor, as long as it is perfectly level and
sufficiently resistant.
-All parts of the machine must be uniformly lit with sufficient light to make sure that
the adjustment and maintenance operations specified in the manual can be
performed safely, and without areas of shadow, reflected light, glare and avoiding all
situations that could give rise to eye fatigue.
-The lighting must be installed in accordance with the laws in force in the place of
installation.
-the thickness and leveling of the base concrete are essential
-thickness of concrete
≥ 150mm, the leveling of whole length ≤ 10mm.
(picture
14)
Chapter 4 INSTALLAION
CROSSBEAM INSTALLATION
-put two transom on the bracket.
-fix the direction of moving vehicle according to the position of the location. Put two
beam on the transom, the main beam should located on the left side of the moving
vehicle direction, the sub-beam located on the right side, the rolling wheel notch on
the beam should inside.
-check two platform and the diagonal of two transom are straight, then put four posts
on the side of the transom, and fix the nuts on the roof of the post with steel line, put
the safety teeth trough the limit axis, also fix the nuts on the roof of the post.