AAQ AutoLift AL-162016, Руководство по установке и инструкции по эксплуатации

Страница: 11 / 31

162016
Chapter 3 SAFETY
Read this chapter carefully and completely since important information
for the safety of the operator or others in case of improper use of the lift
is included.
In the following text there are clear explanations regarding certain situations
of risk or danger that may arise during the operation or maintenance of the
lift, the safety device installed and the correct use of such systems, residual
risks and operative procedures to use (general specific precautions to
eliminate potential hazards).
Lifts are designed and built to lift vehicles and hold them in the
elevated position in an enclosed workshop. All other uses of the lifts
are unauthorized. In particular, the lifts are not suitable for:
-washing and spray work;
-creating raised platforms for personnel or lifting personnel;
-use as a press for crushing purposes;
-use as elevator;
-use as a lift jack for lifting vehicle bodies or changing wheels.
The manufacturer is not liable for any injury to persons or damage to
vehicles and other property caused by the incorrect and unauthorized use of
the lifts.
During lifting and lowering movements the operator must remain in the control
station.
The presence of persons inside the danger zone indicated is strictly
prohibited.
During operations persons are admitted to the area beneath the vehicle only
when the vehicle is already in the elevated position, when the platforms are
stationary, and when the mechanical safety devices are firmly engaged.
Do not use the lift without protecion devices or with the protection devices
inhibited.
Failure to comply with these regulation can cause serious injury to
persons, and irrepearable damage to the lift and the vehicle bein lifed.