AAP Elite S series, Руководство по эксплуатации

Страница: 6 / 32

6
On an LCD keypad the display will show
“Area/s to Arm” “A B”.
This indicates that both Areas A & B are selected for arming.
At this point if you press the
<ENTER> button, both of the selected Areas
will Arm.
If before pressing the <ENTER> button you wish to de-select one of the
areas prior to arming you can use buttons 1 or 2 on the keypad.
Button 1 relates to Area A and button 2 relates to Area B.
For example, if you press the number 2, Area B will turn off on the LCD
keypad with the display showing (A -), or zone indicator 2 will turn off on
the LED keypad indicating that only the remaining selection (Area A) will
now arm if you press the <ENTER> button.
If you don’t do anything the panel will proceed to automatically arm both
areas in 10 seconds time.
DISARMING THE ALARM
Disarming the alarm will turn off all detectors in the Area or Areas that
were Armed. To Disarm the alarm press;
<CODE><ENTER>
Area A,B or both armed LED’s will turn OFF .
Only the Areas assigned to the user code and keypad will disarm. To allow
disarming of both areas the keypad and the user code must be assigned
to Areas A&B. For example, if the keypad was assigned to both areas but
the code was only assigned to Area A, Area A will disarm when the user
enters their code. If Area B was also armed it will remain armed.
SELECTIVE AREA DISARMING of THE ALARM
If the panel is split into two areas and the user and keypad are both
assigned to the two areas it is possible to select which Area or Areas you
wish to Disarm. To do this your installer will have programmed the panel to
require the <ARM> button to be pressed before the code to arm the panel.
This special Arming option when enabled will also enable the special dis-
arming mode. To selectively Disarm the alarm press;