AAP Elite S series, Руководство по эксплуатации

Страница: 18 / 32

18
PROGRAMMING THE TIME & DATE
The alarm system has an internal clock that may be used to automatically
Arm or Disarm the alarm, turn Outputs On or Off or restrict User activity. It
is also used to identify when events occurred in memory via the LCD key-
pad. The clock also has provision for 8 pre-programmed holidays and
start/stop times for daylight saving. Daylight saving times can be adjusted
in client mode but will normally be set by your installer so the program lo-
cations are not covered here.
To change the Time & Date press;
<PROGRAM> <26> <ENTER> <1> <ENTER> <HHMM> <ENTER>
HHMM = 0000 to 2359 (programmed in 24 hour format)
<PROGRAM> <26> <ENTER> <2> <ENTER> <D> <ENTER>
D = Day number 1-7 (1= Sun to 7=Sat)
<PROGRAM> <26> <ENTER> <3> <ENTER> <DDMMYY> <ENTER>
DDMMYY = date/month/year
To view or set daylight saving On
<PROGRAM> <26> <ENTER> <4> <ENTER>
If LED 1 is on daylight saving is currently active
To Program Holidays
<PROGRAM> <170> <ENTER> <1-8> <ENTER> <DDMMYY> <ENTER>
Where 1-8 relates to holidays 1-8 and DDMMYY = date/month/year
PROGRAMMING THE DTMF REMOTE CONTROL CODES
The alarm system has the ability to allow the owner to call the panel from
a remote telephone and Arm/Disarm the system, turn Outputs On/Off, turn
on a microphone at the control panel or force a test call to the monitoring
company. You can also acknowledge alarms reported on voice or domes-
tic reporting mode with a 4 digit code. If the features are available the
owner can program these codes from
CLIENT program mode.
To change the DTMF Arm/Disarm codes press;
<PROGRAM> <63> <ENTER> <1 or 2> <ENTER> <####> <ENTER>
1=Area A, 2=Area B, #### = 1-4 digit code