AAP Elite S series, Руководство по эксплуатации

Страница: 23 / 32

23
FORCE A TEST CALL
If the alarm is monitored by a monitoring company it may be necessary to
force a test call to ensure that everything is still functioning correctly. This
function is available form the panel keypad or by remote dial-in. If the test
call is being forced form the keypad it must be done in Idle Mode (the
panel is not armed or in program mode).
To Force a Test Call from the keypad press;
<CONTROL> & <0>
(You must hold the “control” button down and press “0” within 2 seconds)
The alarm Panel will now call the monitoring company and send a manual
test call (event type 601).
To Force a Test Call from a remote telephone, dial the panel. When the
panel answers the call it will send the modem tones. When the tones finish
enter in the Remote Test Code programmed at location P175E15E (see
page 17) then when you hear the voice or tone prompt to say the test has
been initiated hang-up the telephone.