25
8. FUNCTION MODE
Use the function mode to set various functions. The set values are saved in non-volatile
memory and are maintained even if the power is disconnected.
8.1. Description of functions
The first 2 digits of the Function No. are the function group. The last 2 digits of the
Function No. are the function item.
Cf
Calibration function
f0
Basic function
f1
Comparator function
Use this function to set the comparator operation.
f2
Analog output function
Use this function to set the output values of the analog voltage output and
analog current output.
f3
,
f4
Serial communication function
Use this function to set the RS-232C or RS-485.
* Set the zero point input voltage (
Cf-04
), the span input voltage (
Cf-05
) and the
displayed value for the span input voltage (
Cf-06
) in the calibration mode.
* Set the upper limit value (
f1-01
) and lower limit value (
f1-02
) in the comparator
mode.
* When setting a function, the decimal point blinks to indicate the current value is not a
measured value.
8.2. Key operation
In the measurement mode, press the
+
keys to enter the function
selection mode.
8.2.1. Function selection mode
Select the function group. (First 2 digits)
Select the function item. (Last 2 digits)
Enter the setting changing mode.
Save the setting in non-volatile memory and then return to the measurement
mode.
Содержание AD-4531B
Страница 59: ...Blank...
