Aalborg TIO, Руководство по эксплуатации, Страница: 89 / 98

86
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
K-Factor
Read and set K-Factor relative to N2 Mode: D
–
Disabled (K-Factor = 1.0)
I
–
Internal
U –
User
-Defined
14
K
S (read current settings) Returns current mode, index and UD value
KS:Mode,Index, UDvalue Example: KS:U,1,0.91200
D (Set Mode: Disabled)
KD
I (Set Mode: Internal Index)
<Index> [1-22]
KI:Index,GasName Example: KI:1,Ar
U (Set Mode: User
-Defined V
alue)
<V
alue>
[0.00001-999.9]
KU:V
alue
Example: KU:0.91200
Calibration Settings
Sets/Reads Calibration related variables. Argument 1 = T Hours since last time unit was calibrated. NOTE: must be reset to zero after calibration.
15
C
P Flow Power Up Delay [seconds]
<V
alue>
[seconds]
CP:<value> Example: CP:3
No Argument (Returns Current Power Up Delay)
CP:<value> Example: CP:3
F Device Full Scale Range in liter/min
<V
alue>
[liter/min]
CF:<value> Example CF:1000.0
No Argument (Returns Current Meter FS Range)
CF:<value> Example: CF:1000.0
L Device Low Flow Cut Off in % of full scale
<V
alue>
(%FS)
CL:<value> Example: CL:5.0
No Argument (Returns Current value)
CL:<value> Example: CL:5.0
T Read/Reset Calibration/ Maintenance T
imer
No Argument (read timer)
CT
:<value>
Example: CT
:1024.2
Z Set Cal. T
imer to Zero
CT
:Z