Aalborg DPC, Руководство по эксплуатации

Страница: 95 / 128

91
COMMAND
NAME
DESCRIPTION
No.
COMMAND SYNT
AX
Command
Argument 1
Argument 2
Argument 3
Argument 4
Response
Temperature Alarms
Sets / reads the parameters of the temperature alarms. Note: High alarm value has to be more than Low alarm value.
Device T
emperature Alarm conditions:
Temp. > High Limit
= H
Temp. < Low Limit
= L
Low < T
emp. < High
= N
Alarm Settings Reply parameters: M
– mode (E/D)
Hv
– High settings value
Lv
– Low settings value
A
– Action Delay (sec)
L
– Latch mode (0-1)
P
– Power Up delay (sec)
12
TA
C (set T
emp Alarm
High and Low limits parameters)
<V
alue>
(high limit, Kelvin.) [253.16 °K – 343.15 °K]
<V
alue>
(low limit, Kelvin) [253.15°K – 343.14°K]
TAC:333.25,263.15
A (T
emp Alarm action
delay in sec.)
<V
alue>
[0-3600]
TAA:<V
alue>
Example: T
AA:5
E (enable T
emp
Alarm)
TA:E
D (disable temp alarm)*
TA:D
R
(read current status)
TAR:H (high alarm) TAR:L (low alarm)
S (Read current settings)
TAS:M,Hv
,Lv
,A,L,P
Example: TAS:E,333.25,263.15,2,0,10
P (T
emp Alarm Power
Up delay in sec.)
<V
alue>
[0-3600]
TAP:<V
alue>
Example: T
AP:60
L (Latch mode)
<V
alue>
(0-disabled*) (1-enabled)
TAL:<V
alue>
where: V
alue = 0 – 1
Example: TAL:0