AAF OptiFlo RC Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 31

5
GDED-IOM-215-A
1
INTRODUCTION
This document contains the information necessary to properly receive, assemble,
install, operate, and maintain the AAF
®
OptiFlo
®
RC filter system and filters. The purchaser,
installer, and operator of the filter system MUST read and comply with this document in its
entirety prior to installation of the equipment and its operation. Failure to comply with the
requirements of this manual may void the product warranty. The information and guidelines
contained in this manual are not exhaustive, and additional or different precautions,
measures, training, etc. may be needed depending on the specific circumstances.
CAUTION
These instructions are specific to the AAF OptiFlo RC filter system and filters. All
ancillary tasks including, but not limited to, electrical and mechanical work,
equipment handling, and safety procedures must be performed in accordance with
industry accepted practice and all relevant local, state, and federal government
codes, laws, and policies.
2
SAFETY
2.1 Safety statement
The air cleaning equipment supplied by AAF International ranges from very large
multiple-component assemblies which require significant and complex, rigging, handling
and assembly on-site, to small compact assemblies that are easily handled and
maneuvered. In addition to size, many of the dust collectors will require electrical
connections, compressed air connections, and will feature high speed rotating equipment.
At all times, when dealing with industrial equipment such as dust collection
equipment personnel safety must be the highest priority of all involved, from riggers,
installers, operators, users, and maintenance personnel. Those responsible on-site shall
review the details of the equipment beforehand and develop a plan for dealing with all
stages of the installation from receipt of the equipment on-site to start-up, commissioning,
and hand-over. All applicable health, safety, and environmental (“HSE”) rules, regulations,
and legislation shall be fully complied with at all times.
2.2 Safe working practices and staff training
AAF International is fully committed to the safety of its employees and those of its
customers. In this spirit, the following guidelines are offered for the consideration of those
responsible:
All personnel shall receive safety training specific to the site, the task, and the
conditions under which the work will be conducted.