INTRODUCTION
Pag. 7 di 26
This equipment must be installed directly on the forklift mast, and connected to the distributor
by means of a hydraulic circuit; the attachments must then be applied to it (forks, clamps ecc.).
The sideshifting movement through cylinder hydraulic actioning.
The coupling components of the fork holding plate are manufactured in compliance with the
ISO 2328 norm.
Two construction solutions are proposed for coupling with the mast:
1.
Attachment with welded brackets (design and structural dimensioning charged to the
customer).
2.
Attachments without brackets (design, structural dimensioning and welding charged to the
customer).
