3 INSTALLATION
Pag. 8 di 26
3
INSTALLATION
Verify the nominal capacity of equipment
To check the nominal capacity of equipment, consult the identification label
Check operating pressure and flow rate of oil
A.T.I.B. advises to respect the hydraulic flow rates and operating pressures shown in
, in
order to optimize the operation of the equipment and avoid problems during the work or
commissioning phases. The values are indicative and may vary depending on the equipment.
ISO 2328
PORTATA (l/mm)
Max. operating
pressure (Bar)
Min.
Max.
recommended
122 ISO II
5
15
10
200
122 ISO III
10
20
15
200
122 ISO IV
12
25
18
200
Tab 2
WARNING
Make sure that the operator of the forklift is aware of the maximum capacity of the
attachments, so as NOT to pose a danger to himself and to the people who work in his
vicinity.
WARNING
RESPECT THE MAXIMUM WORKING PRESSURES INDICATED
