A-PLUS AUTOMATION A1-M-XL, Инструкция по эксплуатации

Страница: 13 / 24

13
A1-M-XL
4.9 CHECKING OPERATIONS TO BE EFFECTED BEFORE WORKING START
Once the machine has been properly installed (as previously described), check that:
• The mouldings to be assembled are properly positioned on the working bench
• The magazine is loaded with the type of Wedges suitable with the mouldings to be assembled
• The claw-head corresponds to the wedges size loaded in the magazine
• The adjustment of the vertical clamp is correct (chapter 4.8.2)
• Pressing halfway down on the pedal, the vertical clamp hold the frame properly.
• The adjustment of the inserting position is correct (see Chapter 4.8.1)
After checking the points related to the above operations,
• Press the pedal all the way down to insert the nail
If you want to insert 2 or more nails one upon the other in the same position, you must release
the pedal until halfway and then press it full down again to insert the second nail