A-PLUS AUTOMATION A1-M-XL, Инструкция по эксплуатации

Страница: 17 / 24

17
A1-M-XL
7. DIAGNOSTIC
7.1 SAFETY WARNINGS
The interventions must be executed by personnel properly trained and they must take all precautions in order to
avoid accidental starts.
7.2 BREACKDOWN SEARCH
Functional inconveniences (causes/remedies)
TROUBLE POSSIBLE CAUSE REMEDY
Pressing the foot pedal the Wedges
ejection is irregular
Wedges wrongly positioned into
the magazine
• Check that the Wedges sharpened side
(glue side) faces up
• Check that Wedges V vertex is pointing
toward machine’s external side
Guide channels damaged or
jammed
• Check that the guide channels are not dirty
or jammed
Claw head not suitable with
Wedges size
• Check that the number engraved on the
wedge claw head match the Wedges size
Faulty Wedges • Replace the Wedges
Wishing to insert several Wedges
one upon the other in the same
point, they do not stack properly or
tilt during their insertion
Unsuitable Wedges • Replace the Wedges with suitable ones
Poor frames clamping (the
frame moves during the Wedge
insertion)
• Check and reposition the vertical clamp
• Replace the pressure pad with the proper
one
Wore and torn driver blade • Replace the driver blade
Jammed driver blade
• Clean the driver blade’s upper part by
removing any material jamming the upper
profile
7.3 TECHNICAL SERVICE REQUEST PROCEDURES
For any requirement, please contact the Manufacturer’s Customer Service.
For any request for technical service, list the data on the identification plate, the approximate number of hours the
machinery has been used and the type of malfunction.
E_Mail: service@a-plusautomation.com
FAX: +39-0543-480770
Via Selva, 23/25 - 47122 Forlì - Italy
In the USA please contact:
E_Mail: service@a-plusautomationusa.com
FAX: 248-851-8777
31874 Northwestern Highway
Farmington Hills, MI 48334