A-PLUS AUTOMATION A1-M-XL, Инструкция по эксплуатации

Страница: 18 / 24

18
A1-M-XL
8. SPARE PARTS
8.1 SPARE PARTS LIST
Even though the machine has been submitted to several tests and functional checks, we listed below the
components that we suggest you to have a minimum and sufficient set of. This will help guarantee the shortest
possible downtime.
COMPONENT
• NAIL DRIVER BLADE
• NAIL CLAW HEADS
• “L” SHAPED SUPPORT (NAIL GUIDE)
• VERTICAL AND HORIZONTAL CLAMPING
8.2 SPARE PARTS ORDERING
We remind you that only a qualified technician can repair the machine.
Therefore we suggest the intervention of your local distributor or A-Plus Automation Center of Technical Assistance,
which has access to qualified staff, proper equipment and tools, and who uses original spare parts.
To order the above spare parts, send the following data by fax or letter:
• Model of the Machine
• Code of drawing scheme
• Reference number of spare part or group indicated on the mechanical drawing
• Code number of single or group spare part
9. DEMOLITION
9.1 DEMOLITION
When scrapping the machine, group components by chemical composition and dispose of separately in accordance
with applicable legislation.
Do not dispose of non-biodegradable materials, lubricant oils and non-ferrous articles (rubber, PVC, plastics etc.)
in the environment.
10. ATTACHMENTS
10.1 SCHEMES
You can find here attached the following schemes:
• (A) Sharpening Table
• (B) Mechanic Schemes