Caution:
Once the mounting, plumbing, discharge tube and water filling is completed, then
only the power supply should be given.
For draining water from the water heater, following steps
needs to be followed:
1. Switch off the electric supply to the water heater.
2. Open the hot water taps until the water is not hot any
more.
3. Close cold water supply.
4. Drain the water by moving the lever of safety valve in the
direction of the arrow as indicated in the diagram. (Fig. 6)
Draining
Fig. 6 Safety valve
Caution:
Before using the water heater, make sure that it should be completely filled with
water.
Please turn off the power supply to the water heater prior to draining the water
heater.
Warning:
This water heater should not be operated with insufficient amount of water.
Failure to do so may result in damage to the water heater & injuries to the users.
This will also make the warranty null & void.
Control panel operations
Fig. 7 Using control panel
Indicator glows when the
heating is in progress.
To decrease the Set
Temperature (normal mode)
To increase the Set
Temperature (normal mode)
5
Infra-Red rays connecting
the water heater and the
wireless remote
To switch ON/OFF the heater.
While switched on the
display shows the water
temperature as shown
above.
The LED display shows:
• Displays actual and set
temperature; indication
of timers and power
consumed.
