7. Auto Off
To set the auto off function press the “AUTO OFF” key and it
shows the default off time as “23.59”. Change the time
flashing in the digital by “
“ or “
“ keys to set the hours
and minutes. By pressing the “AUTO OFF” key again then
changed time in the LED display and will be set as a Auto
Off time. The LED display as shown in Fig. 13.
8. Clock
The clock is real time clock and it has to be set by pressing
the clock key (in conjunction with “
“ or “
“ key). At first
the hour time (first 2 digits) and then minute time (second
2 digits) will be set. The LED display as shown in Fig. 14.
9. Override
By pressing the ”override” key, and the water heater enters the heating state instantly. The
heating indicator glows, when the temperature preset by users is reached the water heater
returns to the state before setting. (”override” function can only be used before Auto ON
and after Auto OFF timers). The LED display as shown in Fig. 8.
10. Reset
By pressing the “
“ and “
“ simultaneously for few seconds the water heater will change
into default stage. AUTO ON & OFF times set as 00.01 & 23.59. Power is set 2kW as default.
Set temperature set to 70°C.
Fig. 14
Fig. 15
9
To start heating the water
press ON/OFF key. While
heating the digital display
shows actual temperature
of water inside the tank as
shown in Fig. 7.
To increase the set
temperature (normal
mode), time (when the
Auto ON/Auto OFF or Clock
Set) is pressed.
To select the power option
i.e, 1kW, 2kW or 3kW.
To set the ON time for the
water heater.
To set the OFF time for the
timer.
To set the clock time. It is a
real time clock and it is
default set where in it can
be changed by pressing the
“set clock” key.
To switch ON the water
heater instantly and
continues to heat for one
cycle.
To display the total power
consumption of the water
heater.
To decrease the set
temperature (normal
mode), time (when the
Auto ON/Auto OFF or Clock
Set) is pressed.
OVERRIDE
Wireless remote operations
7
