6
Wireless Remote
Operation Instructions
“Power”
To Switch Off / Switch On the Device.
Cuts off the power supply to the
heating element, irrespective of the
state (heating/non-heating)
To increase the
Set Temperature (normal mode)
Time (when the Auto ON/Auto OFF
or Clock Set) is pressed.
Pressing the Switch once will
Increase the Set Temperature by
1°C in Normal Mode.
During Time setting, pressing the
Switch once will increase the
Min/Hour by 1 each.
The Temp setting can be Varied
between 25°C to 75°C
To decrease the
Set Temperature (normal mode)
Time (when the Auto ON/Auto OFF
or Clock Set) is pressed.
Pressing the Switch once will
Decrease the Set Temperature by
1°C in Normal Mode.
During Time settings pressing the
Switch once will Decrease the
Min/Hour by 1 each.
The Temp setting can be Varied
between 25°C to 75°C
To Display the Total Power
Consumption of the Heater.
On Pressing the Switch, the Display (on
unit) Shows the Energy Consumption
of the Heater for 5 Seconds.
To Select the 1, 2 or 3 KW Power.
The Default Power selection is 2KW
and the customer can change the
Power to 1, 2 or 3KW by pressing
the Switch.
When No keys are pressed (either on unit or
Remote) and the heater is powered, LED
display shows the current water temperature in
degrees.
1. First Press - Displays the Present Set
Temperature and starts flashing.
2. Second Press - The Set Temperature is
increased by one.
3. Third Press - The Set Temperature is again
increased by one.
For each subsequent key press, the Set
Temperature is Increased by one degree .If
there is No Key Press for 5 flashing, then the
displayed number is set as the new Set
Temperature and control goes to Default State.
1. First Press - Displays the Present Set
Temperature and starts flashing.
2. Second Press - The Set Temperature is
decreased by one.
3. Third Press - The Set Temperature is again
decreased by one.
For each subsequent key press, the Set
Temperature is decreased by one degree .If
there is No Key Press for 5 flashing, then the
displayed number is set as the new Set
Temperature and control goes to Default State.
First Press - Displays the Total Energy
Consumption of the Unit (in KWh) for 5 sec
and returns to the Default display state.
For every Key Press the Total Energy
Consumption of the Unit is displayed for 5
Sec.
1. First Press - Displays the Present Power
Setting (in KW) of the Heater and starts
flashing.
2. Second Press - The Power Setting is
increased by one and Flashing continues.
1
2
3
4
5
“Increase”
“Decrease”
“Energy
meter”
“Power
Select”
Sl#
Button
Functionality
Display (on Unit)
7
To set the ON TIME for the timer.
1. The default ON TIME is 00:01 and
the customer can change the ON
TIME by pressing the Auto on
Switch (in conjunction with
increase/decrease key).
2. At first the HOUR time (First 2
Digits) and then MINUTE time
(Second 2 digits) will be set.
To set the OFF TIME for the timer.
1. The default OFF TIME is 23:59 and
the customer can change the OFF
TIME by pressing the Auto off
Switch (in conjunction with
increase/decrease key).
2. Initially the HOUR time (First 2
Digits) and then MINUTE time
(Second 2 digits) will be set.
To Set the Clock time.
1. The Clock is Real Time clock and is
Default set and the customer can
change the clock by pressing the
Clock Switch (in conjunction with
Increase/Decrease switch).
2. At first the HOUR time (First 2
Digits) and then Minute time
(Second 2 digits) will be set.
Then for every Key Press the next Possible
Power setting is Displayed and if there is No
Key Press for 5 flashing, then the value is set as
the new Power Setting and control goes to
Default State.
1. First Press - Displays the Present ON TIME
of the Timer.
2. Second Press - The HOUR Time (First 2
digits of the LED Display) will start Blinking
(this value can be increased or decreased
using the increase/decrease keys).
3. Third Press - The HOUR Time is set and the
MINUTE Time (Second 2 digit of the LED
Display) starts blinking,(this value can be
increased or decreased using the
increase/decrease keys).
4. Fourth Press- the ON Time is set and
display goes to the Default state.
1. First Press - Displays the Present OFF TIME
of the Timer.
2. Second Press - The HOUR Time (First 2
digits of the LED Display) will start Blinking
(this value can be increased or decreased
using the increase/decrease keys).
3. Third Press - The HOUR Time is set and the
MINUTE Time (Second 2 digit of the LED
Display) starts blinking,(this value can be
increased or decreased using the
increase/decrease keys).
4. Fourth Press- the OFF Time is set and
display goes to the Default state.
1. First Press - Displays the Present CLOCK
TIME.
2. Second Press - The HOUR Time (First 2
digits of the LED Display) will start Blinking
(this value can be increased or decreased
using the increase/decrease keys).
3. Third Press - The HOUR Time is set and the
MINUTE Time (Second 2 digit of the LED
Display) starts blinking,(this value can be
6
7
8
“Auto ON”
“Auto OFF”
“Clock”
Sl#
Button
Functionality
Display (on Unit)
8
To Switch On the Heater Instantly and
Heat Up for a Single Time.
1. If the Customer wants the Heater
to be Switched on instantly (i.e.
before Auto ON & after Auto OFF
times), then he has to press the
Override Switch.
2. Pressing the Switch will switch On
Heater and Heat till the Set
temperature is reached and then
Switches Off.
increased or decreased using the
increase/decrease keys).
4. Fourth Press- the CLOCK Time is set and
display goes to the Default state.
1. First Press -The Heater is instantaneously
switched ON and continues to Heat for
one cycle. If the Heater is already in ON
condition (Override/Timer Mode), then the
Override Key press is ignored.
9
“Override”
Sl#
Button
Functionality
Display (on Unit)
Switches (buttons) on Product
Sl#
Button
Functionality
Display (on Unit)
9
“Power”
To Switch Off / Switch On the Device.
Cuts off the power supply to the
heating element, irrespective of the
state (heating/non-heating)
To increase the
Set Temperature (normal mode)
Time (when the Auto ON/Auto OFF
or Clock Set) is pressed.
Pressing the Switch once will
Increase the Set Temperature by
1°C in Normal Mode.
During Time setting, pressing the
Switch once will increase the
Min/Hour by 1 each.
The Temp setting can be Varied
between 25°C to 75°C
To decrease the
Set Temperature (normal mode)
Time (when the Auto ON/Auto OFF
or Clock Set) is pressed.
Pressing the Switch once will
Decrease the Set Temperature by
1°C in Normal Mode.
During Time settings pressing the
Switch once will Decrease the
Min/Hour by 1 each.
The Temp setting can be Varied
between 25°C to 75°C
When No keys are pressed (either on unit or
Remote) and the heater is powered, LED
display shows the current water temperature in
degrees.
1. First Press - Displays the Present Set
Temperature and starts flashing.
2. Second Press - The Set Temperature is
increased by one.
3. Third Press - The Set Temperature is again
increased by one.
For each subsequent key press, the Set
Temperature is Increased by one degree .If
there is No Key Press for 5 flashing, then the
displayed number is set as the new Set
Temperature and control goes to Default State.
1. First Press - Displays the Present Set
Temperature and starts flashing.
2. Second Press - The Set Temperature is
decreased by one.
3. Third Press - The Set Temperature is again
decreased by one.
For each subsequent key press, the Set
Temperature is decreased by one degree .If
there is No Key Press for 5 flashing, then the
displayed number is set as the new Set
Temperature and control goes to Default State.
4
3
2
1
“Increase”
“Decrease”
“Energy
meter”
SIMULTANEOUS PRESSING OF INCREASE AND DECREASE KEY ON THE UNIT
If the Increase and Decrease keys (in the Display) are
pressed simultaneously for 3seconds
AUTO ON & OFF times are set to a default of
00:00 & 23:59 respectively
Power is set to default of 2kW
Max. heating Temperature is set to default 70°C
In the absence of remote (lost/dry battery), the Heater
functions in the previously set state (temperature/time
/KW settings). User can reset the heater to the default
factory settings by the above procedure.
064.0
Pull the knob
1.5V
1.5V
1.5V
1.5V
1.5V
AA
A
1.5V
1.5V
1.5V
1.5V
1.5V
AA
A
1.5V
1.5V
AA
A
1.5V
1.5V
1.5V
1.5V
AA
A
