A-Neuvideo ANI-8X2MFS, Инструкция по эксплуатации

Страница: 35 / 44

33
Serial & Telnet Commands
Serial and Telnet Commands
COMMAND DESCRIPTION AND PARAMETERS
GET OUT A HUE
8
Show the hue value when the output is scaled.
SET OUT A SHARPNESS N1
8
Set the scaled output’s sharpness level.
N1 = 0~63 [Sharpness level]
GET OUT A SHARPNESS
8
Show the sharpness level when the output is scaled.
SET OUT A NR N1
8
Set the amount of noise reduction to apply when the output is scaled.
Available values for
N1 :
0 [Off]
1 [Low]
2 [Middle]
3 [High]
GET OUT A NR
8
Show the current amount of noise reduction applied when the output is scaled.
SET OUT A ASPECT RATIO N1
8
Set the aspect ratio of the video shown when the output is scaled.
Available values for
N1 :
1 [Overscan]
2 [Full]
3 [Best fit]
4 [Pan & scan]
5 [Letterbox]
6 [Underscan 1]
7 [Underscan 2]
8 [Follow input]
GET OUT A ASPECT RATIO
8
Show the currently set aspect ratio for the video shown when the output is scaled.
GET OUT ASPECT RATIO LIST
8
List all available aspect ratio options.
SET OUT A AUTO SYNC OFF N1
8
Enable or disable the Auto Sync Off function and set the timeout length.
Available values for N1 :
0 [Disabled]
1 [30 seconds]
2 [60 seconds]
GET OUT A AUTO SYNC OFF
8
Show the current Auto Sync Off setting.
SET OUT A R GAIN N1
8
Set the scaled output’s red gain level.
N1 = 0~1023 [Red gain level]
GET OUT A R GAIN
8
Show the scaled output’s current red gain level.
SET OUT A G GAIN N1
8
Set the scaled output’s green gain level.
N1 = 0~1023 [Green gain level]
GET OUT A G GAIN
8
Show the scaled output’s current green gain level.
SET OUT A B GAIN N1
8
Set the scaled output’s blue gain level.
N1
= 0~1023 [Blue gain level]
GET OUT A B GAIN
8
Show the scaled output’s current blue gain level.
SET OUT A R OFFSET N1
8
Set the scaled output’s red offset.
N1 = 0~1023 [Red offset]
GET OUT A R OFFSET
8
Show the scaled output’s current red offset.
SET OUT A G OFFSET N1
8
Set the scaled output’s green offset.
N1 = 0~1023 [Green offset]
GET OUT A G OFFSET
8
Show the scaled output’s current green offset.
SET OUT A B OFFSET N1
8
Set the scaled output’s blue offset.
N1 = 0~1023 [Blue offset]
GET OUT A B OFFSET
8
Show the scaled output’s current blue offset.
SET IN 8 PHASE N1
8
Set the PC phase value for the VGA input.
N1 = 0~255 [PC phase]
A NEU VIDEO