35
Serial & Telnet Commands
Serial and Telnet Commands
COMMAND
DESCRIPTION AND PARAMETERS
GET OUT A OSD TRANSPARENCY
LEVEL
8
Show the current transparency level of the OSD menu.
SET OUT A OSD DISPLAY N1
8
Enable/disable the info OSD, or set it to display briefly.
Available values for
N1
:
0 [Always off]
1 [Always on]
2 [Display briefly]
GET OUT A OSD DISPLAY
8
Show the current info OSD state.
SET OUT A OSD DISPLAY N1
8
Enable/disable the info OSD, or set it to display briefly.
Available values for
N1
:
0 [Always off]
1 [Always on]
2 [Display briefly]
GET OUT A OSD DISPLAY
8
Show the current info OSD state.
SET AUDIO OUT N1 MUTE N2
8
Enable or disable muting the specified audio output.
Available values for
N1
:
A [HDMI audio output]
B [HDBaseT
™
audio output]
C [Standard analog audio output]
D [Amplified analog audio output]
Available values for
N2
:
0 [Mute disabled]
1 [Mute enabled]
Note:
The HDMI and HDBaseT
™
outputs share their settings.
GET AUDIO OUT N1 MUTE
8
Show the current mute state of the specified output.
Available values for
N1
:
A [HDMI audio output]
B [HDBaseT
™
audio output]
C [Standard analog audio output]
D [Amplified analog audio output]
SET AUDIO OUT ALL MUTE N1
8
Enable or disable muting on all audio outputs.
Available values for
N1
:
0 [Mute disabled]
1 [Mute enabled]
SET AUDIO OUT A ROUTE N1
8
Set the audio source selection behavior of the unit.
Available values for
N1
:
0 [Follow user mode]
1 [Follow video mode]
2 [Analog audio input 1]
3 [Analog audio input 2]
4 [Analog audio input 3]
5 [Analog audio input 4]
6 [Analog audio input 5]
7 [Analog audio input 6]
GET AUDIO OUT A ROUTE
8
Show the unit’s current audio source selection behavior.
SET AUDIO OUT N1 VOLUME N2
8
Set the volume level of the specified output’s audio.
Available values for
N1
:
A [HDMI audio output]
B [HDBaseT
™
audio output]
C [Standard analog audio output]
D [Amplified analog audio output]
N2
= 0~100 [Volume level]
Note:
The HDMI and HDBaseT
™
outputs share their settings.
A
NEU
VIDEO
