34
Serial & Telnet Commands
Serial and Telnet Commands
COMMAND
DESCRIPTION AND PARAMETERS
GET IN 8 PHASE
8
Show the current PC phase value for the VGA input.
SET IN 8 CLOCK N1
8
Set the PC clock value for the VGA input.
N1
= 0~250 [PC clock]
GET IN 8 CLOCK
8
Show the current PC clock value for the VGA input.
SET IN 8 HPOSITION N1
8
Set the PC horizontal position for the VGA input.
N1
= 0~250 [Horizontal position]
GET IN 8 HPOSITION
8
Show the current PC horizontal position for the VGA input.
SET IN 8 VPOSITION N1
8
Set the PC vertical position for the VGA input.
N1
= 0~250 [Horizontal position]
GET IN 8 VPOSITION
8
Show the current PC vertical position for the VGA input.
SET OUT A VIDEO MODE N1
8
Enable or disable the video output bypass mode.
Available values for
N1
:
0 [Video bypass disabled]
1 [Video bypass enabled]
GET OUT A VIDEO MODE
8
Show the current video output bypass mode state.
SET FACTORY VGA DEFAULT
8
Reset the VGA input settings to the factory defaults.
SET VGA AUTO ADJUST MODE
8
Activate the auto detection of the current VGA source’s parameters.
SET OUT A BLANK
8
Enable or disable blanking the video output
Available values for
N1
:
0 [Video output normal]
1 [Video output blanked]
SET OUT A BLANK N1
8
Show the current video output blanking state.
SET OUT A FREEZE N1
8
Enable or disable freezing the video output.
Available values for
N1
:
0 [Video output normal]
1 [Video output frozen]
GET OUT A FREEZE
8
Show the current video output freeze state.
SET OUT A OSD TIMER N1
8
Set the OSD menu’s timeout value.
Available values for
N1
:
0 [Timeout disabled]
1 [5 seconds]
2 [10 seconds]
3 [15 seconds]
4 [20 seconds]
5 [25 seconds]
6 [30 seconds]
7 [35 seconds]
8 [40 seconds]
9 [45 seconds]
10 [50 seconds]
11 [55 seconds]
12 [60 seconds]
GET OUT A OSD TIMER
8
Show the current OSD menu timeout value.
SET OUT A OSD VPOSITION N1
8
Set the vertical position of the OSD menu.
N1
= 0~100 [Vertical position]
GET OUT A OSD VPOSITION
8
Show the current vertical position of the OSD menu.
SET OUT A OSD HPOSITION N1
8
Set the horizontal position of the OSD menu.
N1
= 0~100 [Horizontal position]
GET OUT A OSD HPOSITION
8
Show the current vertical position of the OSD menu.
SET OUT A OSD TRANSPARENCY
LEVEL N1
8
Set the transparency level of the OSD menu.
N1
= 1~8 [Transparency level]
A
NEU
VIDEO
