FRONT PANEL
Buttons
Function Description
Undo Button:
To eliminate the last command and return the unit to the status that existed before the last
command performed.
Backspace Button:
To backspace the latest input button; speci
fi
cally used for removing the last character button
in a two digit channel selection input. It does not undo the last command button pressed.
Switching Operation:
From the front control panel, all of the ANI-MOD matrix operations can be controlled directly and rapidly. To do so,
follow the basic format of pressing the buttons, in the order below.
• ANI-MOD88:
“Input Channel” + “Switch Mode” +“Output Channel”
• ANI-MOD1616/ANI-MOD3232/ANI-MOD6464:
“Input Channel” + “Switch Mode” +“Output C“Enter”
1) “Switch Mode”:
Refers to the Audio & Video synchronal or break away switching modes, which include the buttons
“AV”, “Audio”,
“Video”.
2) “Input Channel”:
Refers to the channel that is to be directed to an output. Depress the input channel button number for the channel to
be controlled. For two digit numbers, the digits must be pressed within
fi
ve seconds of each other, or the operation will be cancelled. The
input channels on the rear panel are counted from left to right, top to bottom.
3) “Output Channel”:
Refers to the channel that will be receiving the input. Depress the output channel button for the channel to be
controlled. The output channels on the rear panel are counted from left to right, top to bottom.
4)
Remember that in cases where the input/output channel is a two digits number, the input delay time between two numbers must less
than 5 seconds; otherwise the operation will be cancelled.
8