REMOTE COMMAND SYSTEM FROM A PERSONAL COMPUTER
The ANI-MOD Matrix series can be controlled remotely from a personal computer. The control signal is brought into the ANI-MOD Matrix
through the RS-232 connector on the back panel of the unit. The commands are input through software that comes with the ANI-MOD
Matrix, once installed in the computer.
RS-121 Cable Pins Used
Communications Protocol:
1. Transmission Rate: 9600 bps
2. Data Format: 8 data bits, No parity , 1 start bit, and 1 stop bit
3. Flowing Control: None
Also known as: 9600,8,n,1
Proper settings for the computer’s communication protocol are shown in the screen shots below:
18