9dot NCORE, Руководство пользователя

Страница: 32 / 56

32
NCORE MANUAL VER. 2 REV. 1
Web interface
Connection
There are two ways to connect to the NCore CMD controller: Ethernet and Wi-Fi.
For the Wi-Fi connection we must look for the SSID "NCore _#" generated by NCore itself. The # symbol indicates the serial
number shown on the label attached to the device.
It can also function as a router through NAT (Network Address Translation) functionality. This means that by enabling NAT
and Wi-Fi, you could access the Internet through NCore on the mobile device or computer (only if an Internet connection
is provided through the Ethernet interface).
Both NAT and Wi-Fi are enabled by default and can be disabled from the interface.
The web interface works with the following browser version and later:
 Chrome: Versión 91.0.4472.114 (Build oficial) (x86_64)
 Firefox: 87.0 (64 bit)
 Microsoft Edge: Versión 91.0.864.48 (Build oficial) (64 bit)

Safari: Versión 14.0.3 (16610.4.3.1.7) (*)
(*) This browser reported only some log display problems.
Access
Enter the default IP address in the address bar of your browser (192.168.9.1 to access from ethernet, 10.9.9.1 to access from
Wi-Fi). Username and password will be requested for identification. Use the same credentials as SSH. The default
credentials are:
 Username: admin

Password: password
The data indicated with the arrow correspond to the creation date of the software loaded in the NCore.
As soon as you log in for the first time, it is recommended to change the user password by accessing the upper right part
of the interface and choosing "Change password".