9dot NCORE, Руководство пользователя

Страница: 29 / 56

29
NCORE MANUAL VER. 2 REV. 1
Menu
The figure shows the main menu, which contains the commands and various menus.
Commands
Actions

Select from the possible actions to impose on the NCore
Clear

Graphically clean the terminal
Help

Brief information about an interface function
Version

Returns the installed software version
Back

Returns to the top menu or exits the main menu
Cmd_info

Access to flags and data communicated by the CMD module
Exit

Exits the interface
Submenu

Ethernet
o
info

Connection details
o
set

Reset ethernet data
 Services

Manages the on and off of Web and SNMP services
o
restart

Restart the service
o
start

Turn on the service
o
status

Information about active processes
o
stop

Turn off the service
 License
o
info

Details of the license used

System
o
reboot

Restart all services (only software, does not interfere with hardware)
o
shutdown

Turn off the interface (*)
o
change_snmp_password

Change the password of the SNMP user
o
change_password

Change the password of the admin user
o
logs

Real-time error messages and warnings
o
reset_config

Restore the default login credentials
o
upgrade

Opens the submenu dedicated to software updates

list_packages

Displays the list of valid packages loaded

upgrade

The software update procedure begins

Wifi
o
change_password

Change the Wi-Fi password
o
change_ssid

Change the SSID of the Wi-Fi
o
toggle

Change Wi-Fi status (turns on if off and vice versa)
o
nat_toggle

Change the access status to the Wi-Fi network
 cmd_info

Access to flags and data communicated by the CMD module
o
services

It manages the turning on and off of the Web and SNMP services
o
restart

Restart the service
o
start

Turn on the service
o
status

Information on active processes
o
stop

Turn off the service
 time
o
set_ntp_server

Allows you to choose the NTP server for clock synchronization
o
set_time

Change the time zone difference from UTC
 version

Information about the version of the modules
(*) IMPORTANT NOTE: In case of "shutdown", the interface cannot be reactivated. To reactivate it, it is necessary to turn
off all power sources including the battery for a few seconds. Then turn it on again and reconnect.