9dot NCORE, Руководство пользователя

Страница: 26 / 56

26
NCORE MANUAL VER. 2 REV. 1
Battery management module
This module has 4 LEDs whose indications are detailed below:
LED DESCRIPTION
(serigraphy)
Colour N° of blinks Meaning
CHARGE PHASE
(CP)
Green 1
2
3
Fixed
First charge phase, at constant current
Second charging phase, at constant voltage
Third phase of charging, maintenance
Charging completed
FAULT
(FAULT)
Red 1
2
3
4
Battery recognition error
Temperature outside the allowed range
Battery charge error
Insufficient battery voltage or no battery
BATTERY PRESENCE
(BP)
Green
Red
Fixed
Flashing
Battery is present and has a valid voltage level
No battery connected or a battery with invalid voltage level is
connected
CIRCUIT BREAKER
(CB)
Green
Red
Fixed
Flashing
Battery switch closed; battery connected (ON)
Battery switch open, battery disconnected (OFF)
Table 7 – LED indications of the battery management module
CMD control module
This module has 4 LEDs:
Serigraphy Colour N° of blinks Meaning
ACTIVITY Green Flashing Ongoing activity
WIFI Green Fixed Active Wi-Fi
ON BATTERY Green
Red Fixed
Fixed Input module power
Battery power
MODE Green
Red Fixed
Fixed Reactive mode
Proactive mode
Table 8 – CMD module led indications
ATTENTION: In the event of an ACDC or battery failure and if the base unit remains on, all outputs are disabled and remain
faulty (flashing red), until the intended power supply is restored. If the error persists, a full reboot of the NCore is required.
ACDC power module
This module has 2 LEDs:
Serigraphy Colour N° of blinks Meaning
AC Green Fixed Input voltage in the correct range
DC Green Fixed Module output is active
Table 9 – ACDC power module led indications
DCDC power module
This module has 2 LEDs:
Serigraphy Colour N° of blinks Meaning
IN Green Fixed Input voltage in the correct range
OUT Green Fixed Module output is active
Table 10 - DCDC power module led indications