9
Modular Assembly and Disassembly
Carefully insert the sensor head and antenna to avoid damaging the 3M™ EM
Eye Meter CTM048.
1. Position the sensor head so that the dowel pins align
with the holes.
2. With the initial head midway through, reposition it so
that it is parallel to the body.
3. Press the sensor head firmly against the body until
both surfaces are flat with each other.
4. Insert and screw in the antenna making sure that it’s
not too tight or too loose. Do not use any tools other
than your hand.
Note: Antenna is not applicable for the RF Signal Sensor.
