25
RF Signal Sensor Display and Controls
MENU FUNCTION
RF UNITS CONVERSION
BAR GRAPH/REFERENCE Display and Button
When the MENU F button is pressed momentarily, the INTERVAL
and AVERAGE data recording timing can be configured.
INTERVAL, in seconds, is the sampling time for PEAK data to be
recorded onto the microSD
™
storage card.
AVERAGE, in seconds, is the sampling time for AVERAGE data to
be recorded onto the microSD storage card.
When the MENU F button is pressed for a longer period, the
hardware setup is shown. At this point, brightness, off-time and
attenuation can be adjusted.
Attenuation (ATT): If the input to the antenna is big enough, set
the attenuation from 0 to 20dB.
When the attenuation is set to 20dB, an additional label of
“20dB” is placed along with the “RF Signal” top heading.
When the bar graph area is pressed, you can set the reference
level for RF measurement.
With the NAVIGATOR bar:
Press the left or right arrows to adjust RF references.
Press the up or down arrows to move the field cursor.
Press the center button to return to the main screen.
Reference options:
1. Memory Reference
2. Current Reference
To choose between Memory or Current reference, press
“V” (enable) or “X” (disable) at the right side of display.
When pressed, the units area toggles
between dBμV, dBm and mV units.
dBμV –> dBm –> mV
