14
EM Field Sensor – Display and Controls
Settings and Displays
(denotes a touch screen feature)
POWER C
Press the “Power C” button to:
1) Clear or reset the screen data (momentarily press)
2) Turn the meter OFF (long press for 4 seconds)
MENU F
Momentary press
adjusts time interval
for data recording
1) INTERVAL recording
2) AVERAGE value
Long press
1) Adjust brightness
2) Adjust OFF-time
3) Select AF
NAVIGATOR
Press the arrow buttons to:
1) Increase or decrease value settings
2) Move fields or cursor around the setup screen
3) Return to the main screen by pressing the
center arrow
HOLD
Press the “Hold” button to:
1) Freeze the display (the “Hold” symbol appears)
2) Freeze maximum values (press twice for the
“Max” symbol to appear)
DATA STORAGE
Press to read the data from the memory card
RECORD DATA
Press record area to start data writing onto the
microSD
™
storage card
UNIT
Press “UNIT” button to change units between
dBµV/m or V/m
BATTERY
Battery level display
TIME
Displays time, press to setup
MODE OPTION
The triangle at the upper right side of display
switches modes sequentially as follows:
EM Field
Power Density
EIRP EM Field
When pressed at the “Hardware” setup menu, any
of the mode options maybe disabled or enabled
THRESHOLD BAR
Displays relative amplitude level of EMF
detected. Green means EMF is below set
reference, Red means EMF is above reference.
Press it to adjust the EMF references
AUDIO
Selectable audio mode: Tone (bell), speaker/
volume, mute
PEAK
Displays the peak readout of EMF, Power Density
and EIRP
AVG
Displays the average readout of EMF, Power
Density and EIRP
REF
Displays the reference level setting, either memory
or current references. (EMF and Power Density only)
