15
RF Signal Sensor – Display and Controls
Settings and Displays
(denotes a touch screen feature)
POWER C
Press the “Power C” button to:
1) Turn the meter ON (press the screen for three
seconds)
2) Turn the meter OFF (press for three seconds)
MENU F
Momentary press
adjusts time interval
for data recording
1) INTERVAL recording
2) AVERAGE value
Long press
1) Adjust brightness
2) Adjust OFF-time
3) Select AF
NAVIGATOR
Press the arrow buttons to:
1) Increase or decrease value settings
2) Move fields or cursor around the setup screen
3) Return to the main screen by pressing the
center arrow
HOLD
Press the “Hold” button to:
1) Freeze the display (the “Hold” symbol appears)
2) Freeze maximum values (press twice for the
“Max” symbol to appear)
DATA STORAGE
Press to read the data from the memory card
RECORD DATA
Press “Record” button to start data writing onto
the microSD
™
storage card
UNIT
Press “UNIT” button to change units between
dBµV/m, dBm and mV
BATTERY
Battery level display
TIME
Displays time, press to setup
THRESHOLD BAR
Displays amplitude level of RF signal detected.
Green means RF signal is below reference, Red
means RF signal is above reference. Press it to
adjust the RF signal references.
AUDIO
Selectable audio mode
Tone (bell), speaker/volume and mute
PEAK
Displays the peak readout of RF signal.
AVG
Displays the average readout of RF signal.
REF
Displays the reference level setting, either
memory or current references.
