3M 6204, Руководство пользователя

Страница: 19 / 144

1
2 2 2 2
3 4 5 6 7 8 9
Reader Equipment Installation
Reader Equipment Installation Reader Equipment Installation
Reader Equipment Installation
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 User’s Guide
User’s Guide User’s Guide
User’s Guide 7
7 7
7
NOTICE:
NOTICE: NOTICE:
NOTICE: Do not use 6204 with wire harness from previous reader installations. Power
pins have been moved.
Do not use solvents or harsh cleaners on radome or antennas.
2.5.
RF Safety RF Safety RF Safety RF Safety
NOTICE: NOTICE: NOTICE: NOTICE: The 3M Toll RFID Reader 6204 UHF Reader is equipped with four (4) RF ports.
To prevent reader damage, unused RF ports must be properly terminated with
a 50 ohm load or a functional UHF antenna before power up if the reader has
been configured to use this port. Never power up the reader unless the
appropriate loads or antennas are connected. Always power down the reader
before removing an antenna or load from an RF port.
The maximum antenna cable length is 10 meters.
2.6.
Electrostatic Discharge
Electrostatic Discharge Electrostatic Discharge
Electrostatic Discharge
ATTENTION ATTENTION ATTENTION ATTENTION 3M Toll RFID Reader 6204 antenna ports may be susceptible to
damage from static discharge or other high voltage. Use proper
Electrostatic Discharge (ESD) precautions to avoid static discharge
when handling or making connections to the 3M Toll RFID Reader
6204 reader antenna or communication ports. Equipment failure
can result if the antenna or communication ports are subjected to
ESD.