3M 6204, Руководство пользователя

Страница: 112 / 144

1 2 3 4 5 6 7 8 9
Appendix A Appendix A Appendix A Appendix A – – – – Error Handling Error Handling Error Handling Error Handling
100
100 100
100
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 User’s Guide
User’s Guide User’s Guide
User’s Guide
Figure 9
Wiegand Interface Module Electrical Connections
A.5.1.
Connect the Serial Port
To connect the serial port, perform the following:
1 1 1 1 Terminate the reader umbilical cable using a suitable cable gland or
equivalent method.
2
2 2
2 Identify the serial interface wires and terminate these five wires on the
READER/POWER
connector.
3 3 3 3 Use care when performing the termination to avoid Pin 3 (
RFU
) on this
connector.
Disconnecting WIM Disconnecting WIM Disconnecting WIM Disconnecting WIM
from Serial Port
from Serial Port from Serial Port
from Serial Port
In the event you
disconnect the WIM
module from the
serial port, you need
to restart the console
service for the reader
command line
interface (cli).
See ““““Disconnecting
Disconnecting Disconnecting
Disconnecting
the Wiegand the Wiegand the Wiegand the Wiegand
Interface Module
Interface Module Interface Module
Interface Module””””
later in the is section.